home *** CD-ROM | disk | FTP | other *** search
- Path: news.wco.com!m8
- From: ecgallup@mlode.com (Ed Gallup)
- Newsgroups: comp.dcom.modems
- Subject: Re: Cardinal 28.8 modem
- Date: Thu, 29 Feb 96 01:54:07 GMT
- Organization: Mother Lode InterNet
- Message-ID: <4h30sg$f95@news.wco.com>
- References: <312BD072.78DB@CStone.net> <31349817.63260196@news.paonline.com>
- NNTP-Posting-Host: m8.mlode.com
- X-Newsreader: News Xpress Version 1.0 Beta #4
-
-
- >On Wed, 21 Feb 1996 21:09:54 -0500, Dave Lewis <dlewis@CStone.net>
- >wrote:
- >
- >>I am trying to load this with Windows 95 on a DX4-100 motherboard with
- >>Plug and Play Bios. I am unable to get my machine to recognize that the
- >>modem is on Com 4. If I plug a phone into the board I get a dial tone
- >>and can use the phone.
-
- Comm port 4 shares the same interrupt as comm port 2 (interrupt 3).
- This will cause problems if you have anything hooked up to port 2. Read
- your Cardinal manual page 11. It shows you how to configure the jumpers
- for comm port 4, interrupt 5. Interrupt 5 is normally reserved for a
- second printer on LPT2, so should be free on most computers.
-
- Ed ecgallup@mlode.com
-